Мрежови аксесоари / D-LINK

Standards: IEEE 802.11b/802.11g/802.11n

Security: Wi-Fi Protected Access (WPA/WPA2-PSK, WPA/WPA2-EAP)

Standards: IEEE 802.11b/g/n; USB 2.0

Frequency range: 2.4 GHz to 2.4835 GHz

Security: 64/128-bit WEP data encryption; Wi-Fi Protected Access (WPA/WPA2)

Antenna: Omni-directional Antenna

Standards: 802.11а, 802.11b, 802.11g, 802.11n, 802.11ac

Interfaces: USB 2.0 connector

Antenna Type: Integrated antenna

Security: Wi-Fi Protected Access (WPA & WPA2), Wi-Fi Protected Setup (WPS)

RJ-45 Ethernet Port (10/100/1000 Mbps)

Standards: USB Specification Version 3.0, OHCI (Open Host Controller Interface), EHCI (Enhanced Host Controller Interface)

Supports full duplex in Gigabit Ethernet mode

Supports suspended mode and remote wakeup

Interface: USB 2.0 connector

Security: Wi-Fi Protected Access (WPA & WPA2), Wi-Fi Protected Setup - PIN & PBC

Standards: IEEE 802.11ac, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.11a

Antenna Type: High power 3dBi external antenna

Data Port (in): Supports half/full-duplex operation, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, 10/100/1000BASE-T port

PoE Data Port (out): Supports half/full-duplex operation, 10/100/1000BASE-T port, IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3ab

Supports up to 15.4 watts to powered device

Delivers PoE power up to 100 metres distance

10/100Mbps RJ-45 port for connection to Fast Ethernet switch

USB 2.0 port with attached USB Type A cable for direct connection to PC host

Ethernet port supports auto-sensing speed, full/half duplex auto-negotiation

Bus-powered from USB host or USB hub, no external AC power adapter needed

Device Interfaces: RJ-45 Ethernet Port (10/100/1000 Mbps), USB Type A Connector

Standards: USB Specification Version 3.0/2.0/1.1/1.0; OHCI (Open Host Controller Interface); EHCI (Enhanced Host Controller Interface); IEEE 802.3 Ethernet; IEEE 802.3u 100BASE-T, TX, and T4 compatible; Supports suspended mode and remote wakeup

Power: Input: Bus-powered 500 mA, 5 V DC; Consumption: 150 mA, 3.3 V DC

Minimum System Requirements: Operating system - Microsoft Windows 8/7/Vista/XP SP3; Mac OS 10.6 to 10.8; Linux kernel 2.6.14x or above

Standards: IEEE 802.11ac (Draft); IEEE 802.11n; IEEE 802.11g; IEEE 802.11a

Security: Wi-Fi Protected Access (WPA and WPA2); 64/128-bit WEP; Wi-Fi Protected Setup - PIN and PBC

Antenna Type: Integrated antenna

OS Support: Windows 7, or XP SP3

PoE In: Supports half/full-duplex operation, 10/100/1000BASE-T port, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at

LAN Out: Supports half/full-duplex operation, 10/100/1000BASE-T port, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

Power Output: 5 V DC up to 2.5 A, 9 V DC up to 2 A, 12 V DC up to 2 A

Included Power Adapter Cables: 5.5 mm to 3.8 mm male to male, 5.5 mm to 5.5 mm male to male

Input: 85 ~ 264VAC

Output: 21.6 ~ 29V DC

-30~70°C operating temperature

Protections: Short circuit/ Overload/ Over voltage

Data Port (in): Supports half/full-duplex operation, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, 10/100/1000BASE-T port

PoE+ Data Port (out): Supports half/full-duplex operation, 10/100/1000BASE-T port, IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3at, IEEE 802.3ab

Supports up to 30 watts to powered device

Delivers PoE power up to 100 metres distance (Maximum distance per 802.3u specifications)

Transceiver Type: SFP (Small Form Pluggable)

Standard: IEEE 802.3ab 1000BASE-T Gigabit Ethernet

Connector: RJ-45

Data Rate: 1000 Mbps (IEEE 802.3 compatible), 10/100/1000 BASE-T operation requires the host system to have an SGMII interface with no clocks. With a SERDES interface, this transceiver will operate at 1000BASE-T only

Ports/Channels:1xSFP (mini-GBIC)

Standards: IEEE 802.3z 1000Base-LX Compliant

Compatibility:DES-6507, DES-6509, DEM-340MG Expansion Module, DXS-3350SR, DXS-3326GSR, DGS-3324SRi, DGS-3324SR, DGS-3312SR, DGS-3224TGR, DGS-1024T, DES-3350SR, DES-3250TG, DES-3550, DES-3526, DES-3226L Switch

Standards: IEEE 802.3, IEEE 802.3u, HomePlug AV2, IEEE 1901

Ethernet interface: RJ-45 Gigabit Ethernet LAN port

Data rate: Powerline - transfer speeds up to 1000 Mbps; Ethernet: 10/100/1000 Mbps (auto negotiation)

Security: 128-bit AES data encryption

Input: 85 ~ 264VAC

Output: 21.6 ~ 29V DC

-30~70°C operating temperature

Protections: Short circuit/ Overload/ Over voltage

Ports/Channels:1xSFP (mini-GBIC)

Standards: IEEE 802.3z 1000Base-LX Compliant

Compatibility:DES-6507, DES-6509, DEM-340MG Expansion Module, DXS-3350SR, DXS-3326GSR, DGS-3324SRi, DGS-3324SR, DGS-3312SR, DGS-3224TGR, DGS-1024T, DES-3350SR, DES-3250TG, DES-3550, DES-3526, DES-3226L Switch

PoE + Data Ports (IN): 1x10/100/1000BASE-T RJ45 port, Supports half/full-duplex

PoE + Data Ports (OUT): 2x10/100/1000BASE-T RJ45 port, Supports half/full-duplex

Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x Flow Control

Built-in 4 kV surge protection

Slots: 2 slots redundant rower supply chassis

Rack mounting chassis: 1U

Compatibility: DPS-xxx series power supply modules

Ports/Channels:1xSFP (mini-GBIC)

Standards: IEEE 802.3u, IEEE 802.3z, IEEE 802.3x

Compatibility: DES-1228, DES-1228P, DES-3252P, DES-3228PA, DES-1252, DGS-3612G

Mini GBIC to 1000BaseSX Multi-mode Fiber Transceiver

Distance up to 550m

Supported temperature -40° to +85°C

Suitable for all D-Link industrial switches with Mini GBIC slots

Input: 90 ~ 264VAC

Output: 48 ~ 55V DC

-20~70°C operating temperature

Protections: Short circuit / Overload / Over voltage / Over temperature

Mini GBIC to 1000BaseSX Multi-mode Fiber Transceiver

Distance up to 2 km

Supported temperature -40° to +85°C

Suitable for all D-Link industrial switches with Mini GBIC slots

Mini GBIC to 1000BaseLX Multi-mode Fiber Transceiver

Distance up to 10 km

Supported temperature -40° to +85°C

Suitable for all D-Link industrial switches with Mini GBIC slots

Input: 90 ~ 264VAC

Output: 48 ~ 55V DC

-20~70°C operating temperature

Protections: Short circuit / Overload / Over voltage / Over temperature

Cost-effective solution for 10G fiber connection

Small form factor, allowing higher port densities for 10G connections

Lower power dissipation

Hot-pluggable

Interfaces: 4 x 10/100/1000BASE-T PoE ports, 1 x 10/100/1000BASE-T MGMT port

Standards: PoH (Power over HDBaseT)

Power Budget: 90 W per port, 180 W total power budget

Input Voltage: Range 90 to 264 V AC, Input Frequency: 47 to 63 Hz

Ports/Channels: 1xSFP (mini-GBIC) to 1000BaseLX

Standards: IEEE 802.3z

Input Voltage Range: 90 to 264 V AC

Input Frequency: 47 to 63 Hz

Max Input Current: 2 A at 100 V AC, 1A at 240 V AC

Max Inrush Current: 60 A at 230 V AC

Compliance with IEEE802.3ae, 10GBASE-LR

Form Factor Type: SFP+

Fibre Channel FC-PI standard: 1200-SM-LL-L

Fiber Media support: Single-Mode